What is Servo Controller in the Glass Tempering Furnace？

What is Servo Controller in the Glass Tempering Furnace？

Answer: Similar to the inverter, a Servo controller is a type of device used to control servo motor. Thanks to its extensive speed range, high precision positioning ability, quick response, high reliability, as well as strong ability in environment adaptiveness and anti-interference, it has been widely used in positioning devices that require high-speed and high-precision. At present, our company uses servo controllers primarily in applications such as transport positioning control and bending control devices.

In general, a servo drive controls servo motor through position, speed and torque to achieve high-precision positioning in a transmission system.

https://www.landglass.net/

Performance Requirements for Glass Tempering Furnace Corresponding to the Needs in Tempered Glass Curtain Wall Market

There are a large variety of capacities and configurations for glass tempering furnaces. You should choose the right glass tempering furnace based on your market positioning. For glasses used in curtain walls, the performance requirements of the glass tempering furnace may vary. Today, we will show you the different performance requirements of tempering furnaces for corresponding curtain walls on tempered glass market. These guidelines could be conducive to your next equipment acquisitions.

https://www.landglass.net

What should we do if white haze occurs during glass temping process?

Longitudinal white haze occurring in the middle of the glass panels:     

 Reasons:  

1、The level of the equipment’s roller bed is poor.

2、Radial runout of the ceramic roller bed.

3、The heat balance is not enough.

4、Low temperature in the upper part of the convection furnace.

5、The speed of the glass oscillation inside the furnace is too fast.      

6、High temperature in the bottom part of the radiation furnace.               

7、Check whether the O-shape belt is slipping.               

8、Check whether the main shaft coupling keyway is damaged.                                                   

Measures: 

1、Check the equipment’s level.

2、Check for the radial runout of the ceramic roller bed. (the bearing seat is filled with high-temperature lithium 

lubricating grease) 

3、Appropriately switch on a higher heat balance pressure and operating time.

4.  Increase the speed of the convection blowers above the convection furnace.

5、Lower the speed of the glass oscillation inside the furnace.

6、Lower the temperature in the lower part of the radiation furnace.

7、Check whether the O-shape belt is loose or slipping away.

8、If there is any damage, initiate repair or replace with a new one.

 Transverse white haze occurring at both ends of the glass:

  Reasons: 

1、The temperature difference between the upper part and the lower part of the furnace is too large.               

2、(Radiation furnace) Excessively large heat balance pressure and operating time.                        

3、(JetConvection furnace) Excessively high rotating speed of the convection blowers in the upper part of the furnace.

4、The temperature in the bottom part is set too low.

Measures: 

1、Control the temperature difference between the upper and lower part of the furnace within 10℃.

2、(Radiation furnace) Appropriately reduce the heat balance pressure and operating time.

3、(JetConvection furnace) Appropriately lower the rotating speed of the convection blowers in the upper part of the 

furnace.

        4、Appropriately increase the temperature in the bottom part.

https://www.landglass.net/

How does a position limit switch work?

Also known as limit switch, it is a type of low current electric command device often used for position detection control. When a moving object comes into contact with an actuator, the device operates the contacts to make or break an electrical connection, causing the mechanical moving object to automatically stop, reverse, change speed or cycle in a certain direction or within a certain range.


https://www.landglass.net/

What is the seamless input/output processing control in the glass tempering furnaces?

It refers to the processing control over the heating chamber to allow input and output simultaneously. While the traditional process does not allow a new production cycle before vacating the heating chamber, this method offers much higher productivity; the shortfall of this approach is the lack of flexibility in settings as the input and output have to be synchronized.


https://www.landglass.net/

How does a proximity switch work?

A proximity switch is a type of position limit switch that operates without any direct physical contact with moving parts. When an approaching object being sensed within the detection range, the switch will be actuated without physical contact or pressure to emit control command to PLC. It is used for position limit, object counting, positioning control, and automatic protection in auto-control systems. 


https://www.landglass.net/

How do you clean up the ceramic rollers in the glass tempering furnace?

Use a vacuum cleaner to remove the surface powdery dust on the ceramic rollers in the glass tempering furnace. After that, soak a clean, hairless, soft, white cloth with the softening water and begin to wipe from the center on each side respectively to eradicate the dust. It is best to use distilled or pure water for the wiping process. Refrain from using alkaline cleaning agents or chemicals.





https://www.landglass.net/